Oxgard Praktika T-10, Installation Instructions Manual

Page: 14 / 40

Full-height turnstile Oxgard Praktika Т-10 (T-10H) 14
PROTECTING THE FUTURE

plumbing line or mechanic’s level.
4.2. Installation of the turnstile
4.2.1. Places for installation of the enclosure panels and mobile and fixed
elements of the turnstile and cable routes shall be pre-arranged according
to the working drawing (Fig. 22).
Pay attention that cable ends come out of the ground for 4 meters as
electrical connections shall be made in the upper module of the
turnstile.
4.2.2. Surface to be used for installation of the full-height turnstile shall be
smooth and pre-arranged. For this purpose it is recommended to use
concrete or other noncombustible material.
4.2.3. By guidelines from the installation drawing (Fig. 20) mark the
location for boring by means of a pattern.
4.2.4. According to the installation dimensions (Fig. 21) prepare 9
openings with 18 mm diameter in a floor to put anchors for fixing the
turnstile stand for the depth of 80 mm. The installation openings shall be
arranged relative to external dimensions of the turnstile as per Appendix 2
(Fig. 20, Fig. 21).The depth of the insert opening shall exceed the anchor
length for 5 mm. Insert the anchors into the openings.
Caution! The anchor bolts from the original manufacturer are suitable for
solving the most of problems, however in each specific case of installation
it shall take into account environmental conditions and a type of soil on
which the turnstile is installed. All the construction works shall be
coordinated and agreed by a qualified engineer who possesses all