ВЗР.248100.000OM
Gate K-14
Operation Manual
17
PERFORM ANY WORK WITH THE PRODUCT POWER ON. FAILURE TO
COMPLY WITH THESE SAFETY REQUIREMENTS CAN RESULT IN DEATH
AND DAMAGE TO HEALTH, COMPLETE OR PARTIAL LOSS OF
PERFORMANCE OF THE PRODUCT AND/OR AUXILIARY EQUIPMENT.
REMOVE ELECTRIC BOARD FROM ITS MOUNTS. OTHERWISE, THE
MANUFACTURER’S WARRANTY WILL BE VOID.
3.3 Product maintenance procedure
Maintenance includes the following scope of work:
1)
visual inspection of the product condition;
2)
checking the fastening of product parts and components;
3)
general check of the product operation.
3.4 Visual inspection of the product
3.4.1
Visually inspect the product. There should not be visible damage
on the product.
3.5 Checking the product components
3.5.1
Clean the load-bearing frame from dirt.
3.5.2
Check that all cables are securely attached.
3.5.3
Check threaded connections of the product components; tighten,
where necessary.
3.6 Product functional check
For functional check, perform several test passes.
If no any abnormal noises and operational disturbances are detected, the
product is ready for operation.