Oxford Benchmate C8 Manual Download Page 17

purpose and within the guidelines specified in this instruction manual. 
This  warranty  does  not  cover  damage  caused  by  accident,  neglect, 
misuse,  improper service,  natural forces or  other causes not arising 
from defects in original material or workmanship. This warranty does 
not cover any incidental or consequential damages, commercial loss or 
any other damages from the use of this product. 

• The warranty is invalidated by any non-factory modification, which

will  immediately  terminate  all  liabilities  on  us  for  the  products  or 
damages caused by its use. The  customer shall be responsible for the 
product or use of products as well as any supervision required for safety. 

If requested the products must be returned to the distributor in well 

packed and insured manner and all shipping charges must be paid. 

Note: 

Some states do not allow limitation on the length of implied warranties or the 

exclusion or limitation of incidental or consequential damages. This warranty gives 
you specific legal rights. This warranty is given expressly in lieu of all other warranties, 
expressed or implied. 

• The purchaser agrees that there is no warranty of merchantability or

of  fitness  for  any  intended  purpose  and  that  there  are  no  other 
remedies or warranties, expressed or implied, which extend beyond the 
description  on  the  face  of  the  agreement.  This  warranty  is  only 
applicable to the original purchaser. 

Products received without proper authorization will not be processed 

for warranty or service  . All items returned for service should be sent 
with  postage  prepaid  in  the  original  packaging  or  other  suitable 

packaging, padded to avoid damage. We will not be responsible for 

damage incurred by improper packaging. 

Note: 

This warranty is valid only if the warranty is registered with the supplier within 

30 days from the date of purchase. 

Summary of Contents for Benchmate C8





















Reviews: