13. OPERATION
To operate the Oxford Bench mate C8 micro centrifuge, the below steps
should be followed:
1. Connect the power adaptor & Switch 'On' from the rear side so that
the display will show you the fix RPM readings.
2. Load the rotor symmetrically to avoid accidents and damage to the
centrifuge.
4. Close the lid & flip ON the front switch to start centrifugation.
5. Once the centrifugation is completed, turn the front switch to "Off"
to gradually stop the rotor.
6. After the rotor has stopped, press the lid release button and open
the lid with your thumb in front and fingers on the top - simply lift
the lid back on the hinge.
7. If you want to stop the centrifuge quickly, push the lid release
button and the rotor will stop within a few seconds.
In the following pages the routine centrifuge operation procedures are
explained in brief.