Version 1.4 rev 23 Apr 2019
15
IKon-L
SECTION 2: PRODUCT OVERVIEW
This section provides an overview of the external features and the power and signal connections of the iKon-L. Note that
this section outlines the 936 model. Refer to model specific variations highlighted, see Section 5 for HF, SO and SY models.
2.1 e
xteRnal
f
eatURes
of
tHe
i
k
on
-l
Figure 2: iKon-L (936 model shown)
Mounting Flange
The mounting flange has 4 off mounting holes to clear M4 x 5 deep (see Appendix B).
Sensor
The iKon-L features high resolution CCD sensors with coatings depending on the model. Andor’s unique UltraVac
TM
vacuum technology has been applied to the iKon-L. UltraVac provides a permanent hermetically sealed enclosure for
maximum QE and cooling performance over many years operation.
Camera Window
The iKon-L features a Single AR coated UV grade silica window for optimum transmission. For more information on
camera windows please see
http://www.andor.com/learning-academy/camera-windows-optimizing-for-different-
spectral-regions
.
Shutter
An F-mount integrated shutter is standard on the 936 with F-mount model and optional on EF-mount models.
Mounting Post Locations
There are three holes for the 1/4”-20 UNC tapped 7.0 deep mounting posts with 1” spacing located on the underside of
the camera.
Mounting
face/flange
F-mount
(with Shutter*)
Camera Window
Sensor
Mounting post
locations (x3)