24
I. Name of Model
MS 2 71 1 4
Indicate pole no.
Indicate core length (1-
short, 2-mid, 3-length or
indicate frame Iength). (S-
short
，
M-medial, L – long.)
Indicate centre height
．
Indicate IE2 efficiency.
Three-phase asyn
Motor (56-200).
MC--SingIe-phase capacitor start asyn.motor(63-112)
MY--Single-phase capacitor running asyn.motor(56-100)
ML--Single-phase dual value capacitor motor (63-112)
II. Transportation and Storage of the Motors
1.Transportation
During transportation, care must be taken to keep the
motor in upright position and place it flat, without being
inverted or laterally laid. When being craned, it should be
lifted or lowered slowly
，
but not jerkily. At the same time,
it should be kept the rain and dew away from invasion into
the machine and making it damp
．
13
OPERATING INSTRUCTIONS
The log splitter is designed for splitting logs only. It can
handle logs no bigger than 350mm (E300)
and
450mm
(E400) high depending on the model and having a diameter
no bigger than 900mm. The minimum log width is 75mm.
Only persons competent to do so and having read in full this
manual should use this log splitter. Before using the log
splitter for the first time each day carry out a visual
inspection taking note of any damage and leakages and
ensure that they are fully repaired before using.
Position the unit on solid, and as far as possible, level
ground when operating the log splitter.
At all times when the ram is being both extended and
retracted both hands should be kept on the handle. Lifting
the handle will extend the ram and lowering the handle will
retract the ram.
With both hands on the
handle lift to lower the
wedge.