OWT Industries GREENMACHINE GM15703, Operator'S Manual

Page: 7 / 30

5 — English
KNOW YOUR HEDGE TRIMMER
ATTACHMENT
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
UNPACKING
This product requires assembly.
 Carefully remove the items from the box. Make sure that
all items listed in the packing list are included.

Inspect the product carefully to make sure no breakage
or damage occurred during shipping.

Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.

If any parts are damaged or missing, please call
1-800-332-1631 for assistance.
PACKING LIST
Hedge Trimmer Attachment
Scabbard
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
tool until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not connect to power head until assembly is complete.
Failure to comply could result in accidental starting and
possible serious personal injury.
ATTACHING THE HEDGE TRIMMER
ATTACHMENT TO THE POWER HEAD
See Figure 2.
WARNING:
Never attach or adjust any attachment while power head
is running. Failure to stop the engine could cause serious
personal injury.
The hedge trimmer attachment connects to the power head
by means of a coupler device.

Stop the engine and remove the spark plug wire on the
power head.

Remove the hanger cap from the attachment

Loosen the knob on the coupler of the power head
shaft.

Push in the button located on the hedge trimmer
attachment. Align the button with the guide recess on the
extension shaft coupler and slide the two shafts together.
Rotate attachment until button locks into the positioning
hole.

Tighten the knob securely.
NOTE: If the buttons do not release completely in the
positioning holes, the shafts are not locked into place.
Slightly rotate from side to side until the button is locked
into place.
SCABBARD
Always use the scabbard to cover the blade when the
attachment is not in use.
PRODUCT SPECIFICATIONS
Cutting Capacity.............................................................................................................................................................3/8 in.
Effective Cutting Area ............................................................................................................................................... 17-1/2 in.
Weight .......................................................................................................................................................................... 4.1 lbs.
FEATURES
ASSEMBLY