Owon TI332, User Manual

Page: 33 / 43

2.Operation and Settings
29
2.2.3.2 Alarm below threshold
Edit the lower limit alarm value, and then turn on the lower limit alarm switch (these two steps
are in no particular order). If the temperature value in the screen area is higher than the set
threshold temperature, an alarm icon will pop up on the screen. When the temperature value in
the screen area is lower than the set threshold temperature, the alarm icon will disappear.
2.2.4 WiFi
2.2.4.1 Enable and Disable WiFi
Select WiFi settings in the settings interface. After turning on the WiFi switch, the WiFi icon will
be displayed on the status bar of the home page.
When the WiFi switch is turned off, the WiFi icon in the status bar will not be displayed
2.2.4.2 WiFi Configuration
Select the WiFi setting in the setting interface, and press "OK & Homepage" to set the WiFi. The
SSID of the WiFi is the same as the serial number on the side of the handheld thermal imaging
camera. The initial password is 12345678. When the WiFi is off, select refresh password to
randomly change the WiFi password and display it. When the WiFi is on, the WiFi password
cannot be changed. If you forget the WiFi password, you can view the current WiFi password on
this interface.