6
Important safety information!
• The Dimmer Switch must be installed and serviced only by qualified
electrical personnel.
• Do not touch the terminals of the device during the testing.
• Turn off all power supplying this equipment before installing.
• Make sure that the power supply is off before connecting or
disconnecting it to the auxiliary device.
• Always use a properly rated voltage sensing device to confirm power
is off.
• Replace all devices, doors and covers before turning on power to
this equipment.
Failure to follow these instructions will result in death or serious
injury.
Installation
2
Turn off all power supplying and remove the switch panel.
Get started:
1
