User Manual of
OWON
Color Mixed Signal Digital Storage Oscilloscope
60
Fig.5-45
CURS MEAS Menu
The description of the
cursor measurement menu
is shown as the following table:
Function Menu
Setting
Description
Type
OFF
Voltage
Time
Switch off the cursor measurement.
Display the voltage measurement cursor and
menu.
Display the time measurement cursor and menu.
Source
CH1
CH2
Display the channel generating the waveform to
which the cursor measurement will be applied.
Delta
Read the difference between cursors.
Cursor 1
Read the position of Cursor 1 (the Freq is read
with reference to the horizontal trigger position
and the Vamp is to the ground point).
Cursor 2
Read the position of Cursor 2 (the Freq is read
with reference to the horizontal trigger position
and the Vamp is to the ground point).
When carrying out the cursor measurement, the position of Cursor 1 can be adjusted
with the
CURSOR1 (VERTICAL POSITION)
knob of Channel 1, and that of
Cursor 2 can be adjusted with the
CURSOR2 (VERTICAL POSITION)
knob
of
Channel 2.
Perform the following operation steps for the voltage cursor measurement of the
channel CH1:
1.
Press
CURSOR
and recall the
CURS MEAS
menu.
2.
Press the
F1
menu selection button to choose
Voltage
for Type, with two purple
dotted lines displayed along the horizontal direction of the screen, which
