Owon OW16 Series User Manual Download Page 51

Page: 51 / 51

8.Appendix

Appendix

Appendix A: Enclosure

Standard Accessories:

Test lead

K-type thermocouple

Quick guide

Crocodile clip

(only for OW16B)

Options:

Bluetooth USB

adapter to PC

(only for OW16B)

Appendix B: General Care and Cleaning

Warning: To avoid electrical shock or damage to the multimeter, ensure that

the insides of the casing stay dry at all times.

Cleaning

To clean the instrument exterior, perform the following steps:
Wipe the dust from the instrument surface with a soft cloth. Do not make any

scuffing on the screen when clean the LCD. Clean the instrument with a wet soft

cloth not dripping water. It is recommended to scrub with soft detergent or fresh

water. To avoid damage to the instrument, do not use any corrosive chemical

cleaning agent.
Dirt or moisture in the terminals can distort readings. Follow the steps below to

clean your multimeter.
1.

Turn the multimeter off and remove the test leads.

Turn the multimeter over and shake out the dirt in the terminals.

Wipe the contacts in each terminal with a clean swab dipped in alcohol.

Summary of Contents for OW16 Series




















































Search results

Summary of Contents for OW16 Series

Reviews:

Related manuals for OW16 Series

Brands by name

Popular brands

Owon OW16 Series, User Manual

Search results

Summary of Contents for OW16 Series

Reviews:

Related manuals for OW16 Series

Brands by name

Popular brands