OWON
Handheld DSO & DMM
7-Advanced Function of Oscilloscope
the horizontal axis and CH2 is on the vertical axis; when the oscilloscope is under the sampling
mode in which no trigger is found, the data appear in light spots.
Operations for various control keys are shown as below:
■
The
CH1 VOL
and
CH1 ZORE
for CH1 are used to set the horizontal scale and position.
■
The
CH2 VOL
and
CH2 ZORE
for CH2 are used to set the vertical scale and position
continuously.
The following functions do not work in the XY display mode:
■
Reference or digital value waveform
■
Cursor
■
Auto Setting
■
Time base control
■
Trigger control
7.8 Waveform Saving Setups
The oscilloscope can save 4 waveforms, which can be displayed on the screen with the present
waveform. The recalled waveform saved in the memory cannot be adjusted,
The
waveform saving /recalling menu
is described in the following list.
Function
menu
Setups Description
Signal source
CH1
CH2
MATH
Select the displayed waveform which you want to save.
Address
A, B, C and D Select the address for saving or recalling a waveform.
Saving
Store the waveform of a selected signal source into the
selected address.
Addresses A,
B, C and D
Close
Start
Close or start displaying the waveforms stored in address A,
B, C or D.
To save a waveform on CH1 in address A, do the following:
1. Press
the
MENU
key and the function menu appears at the right of the screen.
2. Press
the
MUNU UP
or
MENU DOWN
key to select the Waveform Saving. Four items
selectable are displayed at the bottom of the screen.
3. Press
the
F1
key to select the signal source CH1.
4. Press
the
F2
key to select the address A.
5.
Press the F3 key to save the waveform on CHI1 in address A.
４９
