OWON
Handheld DSO & DMM 5-Using the Scope
figure 18: Inverted On
5.17 Using Waveform Mathematics Functions
When adding (CH1 + CH2), subtracting (CH1 – CH2, CH2 – CH1), multiplying (CH1 * CH2) or
dividing
（
CH1 / CH2
）
the input waveforms of CHI and CH2, the Oscilloscope will display the
mathematical result waveform M and the input waveforms of CH1 and CH2 on the screen. The
Mathematics functions perform a point-to-point calculation on the waveforms CH1 and CH2.
To use a Mathematics function, do the following:
1. Press
the
MENU
key and the function menu is displayed at the right side of the screen.
2. Press
the
MENU UP
or
MENU DOWN
key to select the
Waveform Calculation.
Five
items selectable appears at the bottom of the screen.
3. Press
F3
key to select
CH1+CH2
and the calculated waveform M (green) appears on the
screen. Again, press the
F3
key to close Waveform Calculation.
4.
In this case, press the
OSC OPTION
key and the following is visible at the bottom left side
of the screen.
LEFT/RIGHT Time
UP/DOWN CHM Zero
Then, press the
OSC UP
or
OSC DOWN
key to adjust the vertical position of the
calculated waveform M displayed on the screen.
5. Press
the
OSC OPTION
key and the following appears at the bottom left side of the screen.
LEFT/RIGHT Time Base
UP/DOWN CHM Vol
23
