5.Front Panel Operation
21
(2)
Set the number of waveform points:
Press
F1
to select "Wform Points", turn the
knob
or press the number keys to input the desired value and choose the unit. X1, XK
respectively represent 1, 1000. The waveform points range is 2 - 8192.
(3)
Set the interpolation:
Press
F2
to switch between On/Off. If you choose On, the
points will be connected with beelines; otherwise, the voltages between two
consecutive points will not change, and the waveform looks like a step-up one.
(4)
Edit the waveform points
: Press
F3
to enter the operation menu.
Press
F1
to choose "Points", input the number of the point to be edited.
Press
F2
to choose "Voltage", input the voltage for the current point.
Repeat the step above, set all the points to your needs.
Press
F4
to choose "Store", enter the file system. If a USB device is
connected, press
/
direction key to select the storage. "USBDEVICE" is
the USB device storage, "FLASH" is the internal storage. Choose Next level, enter
the desired storage path, choose Save, an input keyboard pops up, input the file
name, and then choose DONE.
How to Select a Stored Waveform
(1)
Enter the operation menu:
Press
→
Editable Wform
→
Select Wform.
(2)
Enter the storage path of the desired waveform file. Turn the
knob
or press
/
direction key to select the desired waveform file.
(3)
Choose Recall output.
How to Edit a Stored Waveform
(1)
Enter the operation menu:
Press
→
Editable Wform
→
Edit Wform.
(2)
Enter the storage path of the desired waveform file. Turn the
knob
or press
/
direction key to select the desired waveform file.
(3)
Choose Recall suppress.
How to Delete a Stored Waveform
(1)
Press
Save
function button to enter the file system.
(2)
Enter the storage path of the desired waveform file. Turn the
knob
or press
/
direction key to select the desired waveform file.
(3)
Choose Delete.
To Output DC
(1)
Press
CH1/2
to select the channel that you want to output DC, then press
DC
button.
(2)
Turn the
knob
to change the value; or press the number keys to input the desired
value, press
F1
or
F2
to select the unit.
