OPERATION
CHARGING THE BATTERY
4
18
Two re-chargeable battery packs and a battery charger are included
with the VS-400-H.
RE-CHARGING BATTERY PACKS
To re-charge the battery packs, insert the battery pack into the charger
contacts first, then press the other side down until the battery pack is
fully seated.
The battery charger plugs directly into a wall outlet.
REMOVING THE BATTERY PACK FROM THE SCOPE
Power off the main scope unit, then disconnect the probe.
Slide the main unit out from the protective sleeve.
Slide off the battery cover from the back of the unit. Insert the battery pack contacts first then press the other
side down until the battery pack is fully seated.
Replace the battery cover and slide the unit back into the protective sleeve.
Battery charger and battery pack