© 2 Save Energy Limited 2012
3
of the Network OWL.
The green LED on the top of the Network OWL will start flashing. After a few seconds
•
the blue LED will start flashing slowly. This is Device Pairing Mode used when set-
ting up other OWL Intuition Products / Devices. For now wait until the blue LED stops
flashing (about 90 seconds).
Check that the green LED is now flashing with a “triple blip” pattern.
•
(- - - - - - - - -).
This indicates that the Network OWL is online and connected to the
OWL servers.
Do NOT proceed to STEP TWO until this flashing pattern is observed.
•
CHECK FINGER
TIGHT
PLUG IN DC POWER CONNECTOR
PLUG IN ETHERNET CABLE
BLUE LED
GREEN LED
RESET
BUTTON
NETWORK OWL
Summary of Contents for Intuition TSE220-120
Page 10: ...10 2 Save Energy Limited 2012 ...
