© 2 Save Energy Limited 2013
5
Other Steps Before Installing
1. Pair Room Sensor with Network OWL
a. Put the batteries into the Room Sensor. The 3
LEDs will start flashing together indicating that
the Room Sensor is ready to be paired.
b. Power down the Network OWL by removing
the power connector. Then after 10 seconds
re-insert the power connector into the Network
OWL and wait. The 3 LEDs on the Room Sen-
sor will stop flashing indicating that it is now
paired to the Network OWL.
c. Now wait until the Network OWL is connected to the OWL servers (the top green
LED should be flashing in a “triple blip pattern”).
d. Log in to the OWL Intuition account at
https://www.owlintuition.com (this is a secure connection). You will then see
the OWL Intuition web dashboard.
e. Soon, a message box will pop-up indicating that a new device has been detected
and requesting you to log out and log back in.
f. When you log back in you will now have a Heating widget within your web dash-
board.
