40 GB/IE
Press the CLOCK button again to return
to the default display.
Setting the alarm time
You can set two different alarm times.
1. Press and hold down the ALARM button
22
for about 3 seconds.
Note:
If an alarm time has been set be-
fore, then that previously set alarm time
appears in the LC display. If not, then the
display shows
0:00 or AM 12:00
.
2. The hour display flashes. Press the SET /
RESET button
21
to set the desired value.
3. Press the ALARM button to confirm your
settings. The minute display flashes.
4. Press the SET / RESET button to set the
desired value.
5. Press the ALARM button to confirm your
settings.
6. Repeat steps 2 to 5 to set the time for
Alarm 2.
Calling up the alarm times
Press ALARM button
22
once or twice to
call up the set time for Alarm 1 or Alarm
2 respectively.
Press the ALARM button again to return
to the default display.
Switching the alarm on / off
Press the SET / RESET button
21
once to
activate Alarm 1. Press the SET / RESET
