Filename:MC4-BT MANUAL
01/26//18
Page 5 of 6
A.
Input #1 (3.5 mini stereo input) –
A1
- Gain/level control for input #1
A
B.
Input #2 (3.5 mini stereo input) –
B1
– Gain/level control for input #2
B
C.
Input #3 (balanced line input) –
C1
– Gain/level control for input #3
C
D.
Input #4 – Digital Toslink
E.
Bluetooth (optional) -
E1
- Pair button for Bluetooth
F.
Volume selection digital Toslink or Bluetooth
G.
Priority override selector for 3.5 mini on #1 or Bluetooth
G1.
Priority override sensitivity control
H.
Power input – 15V DV
J.
Input #3 Selector (microphone/line level)
J1.
Gain/level control for C
K.
3.5 Mini jack – Dual Mono signal output
K1.
Gain/level control for K
L.
Balanced Line Level output
L1.
Gain/level control for L
M.
CAT5 output to OWI AMP Speakers only
A convenient Mic and Line switch (
J
) is accessible from the rear allowing Channel 3 to be assigned to either
Line or Mic level input. Line is to the right and Mic is to the left.
Input # 3 is balanced input with detachable Euro style three pin connectors. When single ended is required, -
and ground are jumped together and + is tied to the hot wire.
The Main Audio Outputs
a)
Unbalanced output
(
K
)
is a 3.5 mini jack output which has volume control (
K1
) for the main level
b)
balanced output
(
L
)
is a green Euro Style output which has a volume control (
L1
) for its main level
c)
Cat 5 output
(
M
)
is a RJ45 Jack which has a volume control (
L1
) for its own main level
The RJ45 connector allows for a quick hook up for Output and power are all hooked up with a single 8 pin
connector. Looking at the RJ45 from the left is pins –
Four (4) trim controls (
1
) for the front panel slide controls.
Bluetooth Setup, Connection, and Pairing –
Bluetooth SETUP to your device:
1)
Push and hold pairing button (E1) for 3 seconds to wake up the Bluetooth module. The light will start
flashing
2)
Push/Tap the pairing button (E1) once again quickly – now the module is in paring mode (fast blinks)
3)
Use your device to search for (OWI MC4) and connect.
4)
There is no code to pair to the unit
Re-connect the device to the MC4-BT:
1)
Push and hold pairing button (E1) for 3 seconds to wake up the Bluetooth module
2)
search for (OWI MC4) on your device and connect.
Priority Override features –
Priority override selector for 3.5 mini on #1 or Bluetooth (G)
This will allow either the Bluetooth or the 3.5 Minijack to have priority over the input.
