OWC Mercury Rack Pro mini-SAS
Chapter 1 - Introduction
1.5.1 LED Indicators
Power Input
Voltage Switch
External mini-SAS Port
Cable Connections:
1. Plug the power cable into the wall and into the OWC Mercury Rack Pro.
2. Verify that the voltage switch is set properly for your country.
3. Connect your external mini-SAS cable to your external mini-SAS controller card.
(neither are included)
1.4 Rear View & Cable Connections
1.5 Front View & LED Indicators
Each drive by has a multicolor LED indicator.
Power:
• Off = Power off
• Blue = Power on (all 4 drive bays)
Access:
• Flashing Red = Drive being accessed
Rebuild:
• Blinking red = Rebuilding RAID array
• Solid Red = Faulty drive
Power On/Off button
is inside the front door on the left side.
Summary of Contents for Mercury Rack Pro mini-SAS
Page 1: ...User Guide Owners Manual...
Page 2: ......
