OWC DIGITAL - MERCURY HELIOS 2
DEVICE SETUP
5
5. Remove the PCIe slot cover from the inner chassis, as shown below. Lift the PCIe slot cover
directly up. It will come out easily.
6. If you are installing a second PCIe card and/or a double-width PCIe card, repeat step 4 and
step 5 to remove the remaining PCIe slot covers, as necessary.
7. Install the PCIe card as shown below. Line up the connectors on the PCIe card with the
PCIe slot, and make sure that the edge of the metal bracket on the PCIe card fits into the
gap between the circuit board and the metal back of the inner chassis of the Helios 2.
NOTE:
Handle the PCIe card only by its edges. Do not touch any of the components on
the face of the PCIe card or the golden connectors.
