Owandy Radiology Ow-RX, User Manual

Page: 48 / 74

USER MANUAL
System use
Ow-RX
(Rev. 6)
42
8. SYSTEM USE
8.1 Switching ON and OFF the device
Press the power switch located on the right side of the timer cover. This
will start the "CHECK" function, which is indicated by an acoustic signal
and the turning on of the LEDS and the display.
When the "CHECK" function is complete, the machine will position itself
by default in the configuration corresponding to the last selection made.
The unit is now ready for X-rays.
NOTE:
• The ready for X-rays condition is signalled by the switching on of the
relative green LED.
• The ready for X-rays condition remains for a set period of time
(variable during the installation phase: default 2 minutes), after this
period of time has passed, this status will be disabled and pressing
the exposure button will not emit rays. The brightness of the display
will also be reduced.
• To return to the ready for X-rays status, the device must be
"woken up" by pressing any key (except for the X-ray button).
Similarly, switching off occurs when the system is switched off by
pressing the power switch located on the right side of the timer cover.
The LEDs and the display will turn off.
