Ovislink OV915WVA User Manual Download Page 68

Page: 68 / 122

OV915WVA User Manual

This page is used to control the time restriction to a special LAN device that

connects to the DSL router. In this page, se the user name and configure the time

settings.

After finishing setting, click the

Apply/Save

button to save and apply the settings.

Url Filter

Click

Advanced Setup

Parental Contr

ol >

Url Filter

, and the following page

appears.

Thisp age is used to prevent the LAN users from accessing some Websites in the

WAN.

In this page, you may select the

Exclude

URL list type or the

Include

URL list type.

If you select the

Exclude

URL list type, it means that the URLs in the list are not

accessible. If you select the select the

Include

URL list type, you are allowed to

access the the URLs in the list.

Click the

Add

button to display the following page.

Summary of Contents for OV915WVA






















































































































Search results

Summary of Contents for OV915WVA

Reviews:

Ovislink OV915WVA, User Manual, Page: 68 / 122

Search results

Summary of Contents for OV915WVA

Reviews: