Ovislink OV915WVA User Manual Download Page 12

Page: 12 / 122

OV915WVA User Manual

Interface

Description

WAN

Connecting the other broadband CPE or Gateway Router

USB 1~2

For connecting the 3G network adapter or other USB storage

devices.

Power

Power interface, for connecting the power adapter.

On/Off

Power switch.

Key reuse, Press the button for less than 5 second and then release

it, enable or disable the 802.11ac function; press the button for more

than 5 second and then release it, enable WPS PBC mode., if WPS

is enabled, the wireless router starts to accept the negotiation of

PBC mode.

2.4G

Key reuse, Press the button for less than 5 second and then release

it, enable or disable the 802.11n function; press the button for more

than 5 second and then release it, enable WPS PBC mode., if WPS

is enabled, the wireless router starts to accept the negotiation of

PBC mode.

Fiber

Fiber port: for connecting the device to a G.Fast optical module

Warning:

Do not press the

Reset

button unless you want to clear the current settings. The

Reset

button is in a small circular hole on the rear panel. If you want to restore the

default settings, please press the

Reset

button gently for 1 second with a fine needle

inserted into the hole and then release the button. The system reboots and returns to

the factory defaults.

3.2 Hardware Installation

3.2.1

Choosing the Best Location for Wireless

Operation

Many environmental factors may affect the effective wireless function of the DSL

Router. If this is the first time that you set up a wireless network device, read the

following information:

Summary of Contents for OV915WVA






















































































































Search results

Summary of Contents for OV915WVA

Reviews:

Ovislink OV915WVA, User Manual, Page: 12 / 122

Search results

Summary of Contents for OV915WVA

Reviews: