Ovislink OV915WVA User Manual Download Page 106

Page: 106 / 122

OV915WVA User Manual

102

The MAC restrict modes include

Disabled

Allow

, and

Deny



Disabled

: Disable the wireless MAC address filtering function.



Allow

: Allow the wireless clients with the MAC addresses in the

MAC

Address

list to access the wireless network of the wireless router.



Deny

: Reject the wireless clients with the MAC addresses in the

MAC

Address

list to access the wireless network of the wireless router.

Click the

Add

button to display the following page.

In this page, enter the MAC address of the wireless client, and then click the

Apply/Save

button to add the MAC address to the MAC address list.

5.3.4

Wireless Bridge

Choose

Wireless

Wireless Bridge

to display the following page.

This page allows you to configure the wireless bridge features of the wireless LAN

interface.

Summary of Contents for OV915WVA






















































































































Search results

Summary of Contents for OV915WVA

Reviews:

Ovislink OV915WVA, User Manual, Page: 106 / 122

Search results

Summary of Contents for OV915WVA

Reviews: