manualshive.com logo in svg

Ovislink AirLive WL-1000UR, User Manual

Share
Download
Ovislink AirLive WL-1000UR User Manual Download Page 19

 

19

4.4.1.6 L2TP 

First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address. 

For example: Use Static 

1.      My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned 

to you.   

2. 

   

Server IP Address: the IP address of the PPTP server.   

3.      PPTP Account and Password: the account and password your ISP assigned to you. If you don’t 

want to change the password, keep it empty.   

3.      Connection ID: optional. Input the connection ID if your ISP requires it.   

4.      Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or 

enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will 

connect to ISP automatically, after system is restarted or connection is dropped. 

6. 

Connection Control: There are 3 modes to select: 

Connect-on-demand: The device will link up with ISP when the clients send outgoing packets. 

Auto-Reconnect(Always-on):The device will link up with ISP until the connection is established. 

Manually: The device will not make the link until someone clicks the connect-button in the 

Status-page.

 

 

Summary of Contents for AirLive WL-1000UR


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands