8
8
Ovislink
AirLive ePhone-1000S
Some Simple Troubleshooting
Problem: Troubleshooting:
LCD display down or
disorder
Unplug the power
#
Wait for 5
seconds
#
Plug the power back.
LCD shows [Please dial],
but the phone is unable to
dial or hang up.
Unplug the power
#
Wait for 5
seconds
#
Plug the power back.
LCD shows [Wait Logon],
[Log On], or [Log On
Failed]
1. Please check the Internet
connection of the RJ-45 is ok.
2. Please check if the AIRLIVE
EPHONE-1000S is able to
acquire an IP address. If not,
please check the Network
Setting and see if the
configuration is correct.
3. Please verify that the account is
valid. Please contact you VoIP
service provider for the account
information.
LCD shows [Ready for
call]. However, when
dialing the phone number,
the LCD shows [Please
Hangup]
Please verify that the account is
valid. Please contact you VoIP
service provider for the account
information.
Hear echo during the
conversation
Please press VOL – to the proper
volume.
Noise
Please check the connection and
see if the connection is loose.
Set to the factory default
setting
1. Press 1234
*
#
LCD shows
[Booting…]
#
Release the
keypad *
#
LCD shows [Page0
running]
#
Press #5*5
#
the
AIRLIVE EPHONE-1000S will
reboot.
2. After rebooting, the phone set
to be the factory default.
English
English
