EN
•
Regularly clean air holes and projector loudspeakers with a soft brush,
otherwise ventilation may get blocked.
High temperature
•
When the projector is on, make sure air holes of the device are not covered.
This is why you should not place it on soft surfaces or cover with materials.
•
Do not look into the lens while it is operating.
Additional information
•
Do not place any liquids or heavy items on the projector.
•
Do not disassemble the projector on your own.
•
Do not keep the projector in humid and wet places – electric shock risk.
•
It is advisable to turn the projector off after 6 hours of continuous
operation.
•
The product is intended for indoor use only.
To assure stability of heat dissipation, before you activate the projector, please
adjust its height in the lower part with the use of a base adjustment knob.
The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective
collection. The product must not be disposed of along with domestic waste
as it may pose a threat to the environment and human health. The worn-out
product must be handed over to the electrics and electronics recycling center.
Description of projector parts (fig. 1)
1.
Direction keys
2.
Exit key
3.
OK key
4.
On/off switch
5.
Power indicator
6.
Image sharpness knob
7.
Image shape adjustment knob
8.
Audio output 3.5 mm
9.
AV input
10.
USB port
11.
HDMI port
Summary of Contents for Multipic 2.5
