Tent Set Up
2.
At each of the four corners where the
rack bars and mounting tracks cross,
using a steel mounting plate and nylock
nuts to secure the bolts on either side
of the bar. Tighten all eight bolts
securely with the included nuts and
wrench. Check all the mounting bolts
and brackets periodically during use
3.
After ensuring the tent is positioned
correctly and all eight bolts are
tightened securely, insert rubber end
caps into the ends of the mounting
tracks. This may require light taps from
a hammer
4.
Undo the Velcro strap that is holding
the ladder compressed. Slide ladder
out until complete ladder locks in
place (as shown in image.
