Overkill Solar 120A 4s 12V BMS, Instruction Manual

Page: 30 / 68

●
Balancer delta-to-balance:​ 15 mV
●
Balancer enabled:​ True
●
Balance only when charging:​ True
Other Parameters / Features:
These settings are consistent across all battery types. For capacity and protection settings, see the individual
sections below for your specific battery type.
●
Number of cells:​ Leave this at the factory default setting that ships with the BMS.
○
12V BMS: 4 cells
○
24V BMS: 8 cells
●
External switch:​ Set this to True if you have an external switch wired to the 2-pin connector, as
detailed in section 2.2.6.
●
Load Detect:​ Enabled
●
LED Enabled:​ N/A
●
LED cap.:​ N/A
●
NTC Settings: ​ 12V BMS: The first two NTC’s should be enabled. The others are not present, so should
be disabled.
○
24V BMS: The first 3 NTC’s should be enabled. The others are not present, so should be
disabled.
●
BMS Name / PIN Protect:​ N/A; leave this setting to its default value