28
6.1 Montaggio del regolatore di temperatura
– Per il montaggio del regolatore di temperatura ri-
muovere il cappuccio filettato sul miscelatore.
– Avvitare il regolatore di temperatura sul miscelatore
(serrare a fondo il dado di raccordo senza esercitare
forza eccessiva!).
– Spingere il sensore nel pozzetto e fissarlo con la
vite.
– Posare il tubo capillare a spirale all’interno dell’iso-
lamento.
6.2 Impostazione dell’incremento della temperatura
di ritorno
– Regolare il volantino (Campo di regolazione, vedi
5.1).
– Portare l’impianto in posizione di fermo (almeno per
la durata di 1 ora )
– Se necessario, impostare il miscelatore a tre vie sul
regolatore di temperatura in modo tale che si rag-
giunga una temperatura di ritorno di 55 °C. Di cifra
in cifra la modifica della temperatura è 5 K (max.
campo di regolazione 30 K, marcatura volantino: 1-
7).
7 Funzionamento
7.1 Sfiato dell’impianto
Prima della messa in funzione, l’impianto deve essere
caricato e poi sfiatato. Durante questa operazione, ri-
spettare le pressioni d’esercizio consentite.
7.2 Fattori correttivi per miscele acqua-glicole
Nella regolazione del flusso è necessario tenere in
considerazione i fattori correttivi indicati dai produttori
di antigelo.
8 Accessori
I set di boccole per il collegamento al sistema di tuba-
zioni devono essere ordinati a parte.
Per l’intera gamma di accessori, consultare il cata-
logo.
9 Manutenzione e assistenza
Il gruppo premontato non richiede manutenzione.
10 Garanzia
Si applicano le condizioni di garanzia di Oventrop in
vigore all’atto della fornitura.