Dirt separator
Transport and storage
17
112455080-V02.09.2019
4. Transport and storage
Transport the product in its original packaging.
The product must be stored under the following
conditions:
Temperature range
0 °C to 70 °C
Particles
Dry and free from dust
Mechanical infl uen-
ces
Protected from mechanical
agitation
Radiation
Protected from UV rays and
direct sunlight
Chemical infl uences
Do not store together with
solvents, chemicals, acids,
fuels or similar substances
5. Installation
DANGER
Risk of injury from heavy dirt separator!
Wear safety shoes during installation.
If necessary, ask other persons for help
during installation.
If necessary, use suitable lifting equip-
ment.
5.1 Requirements to the installation
location
• Leave a suffi cient amount of space under the
dirt separator to be able to remove the magnet.
Refer to the following table for information on the
amount of space relevant dirt separators require.
H
Illust. 6: Magnet
DN
H in mm
50
250
65
250
80
300
100
300
125
400
150
400
200
700
250
700
300
900
• Do not install the appliance in sensitive compo-
nents or in the vicinity of electrical installations.
• During installation, make sure you install the
appliance vertically and without applying any
tension.
Tension (e.g. caused by temperature infl u-
ences) must be compensated for by design
measures.
• Make sure the installation location is suffi ciently
stable. Take into account the deadweight and the
fi lling capacity.
• The appliance is not a load-bearing building
element.
• The maximum sling angle must not exceed 60°.
max. 60°
Illust. 7: Installation aids
• The eyelets on the dirt separator are exclusively
intended as installation aids for lifting (see Illust. 2
and Illust. 7).
• The installation location must be dry and free from
frost.
