13
Measurement-Setup/Valve-Setup
Valve-Setup
Oventrop ---------- Choice of the valve manufacturer by using the keys
and .
Type----------------- Change to valve type by using the key .
Choice of the valve type by using the keys
and .
Size------------------Change to valve size by using the key .
Choice of the valve sizes (dimensions) by using the
keys and .
---------------------
---------------------
OVENTROP
type: Hydrocon
size: 020
VALVE-SETUP
Measurement-Setup
Measuring
method------------- Choice of the measuring methods by using the
keys and .
Balanced pressure method, kv-value method, computer
method, OV-Balance
Pressure----------- Choice of the unit for pressure indication by using the
keys and .
Flow----------------- Choice of the unit for flow rates by using the keys
and .
Water--------------- Choice of the medium (e.g. ethylene glycol) in the heating
circuit by using the keys and .
When using ethylene glycol, indicate the percentage
composition by pressing the key . The indicated value
can be modified by using the keys and .
Connect the temperature sensor to the flow meter.
An
error message (see Temperature Measurement page 14)
appears if there is no sensor connected.
Change to temperature measurement by pressing the key
“OK”.
Confirm the measured temperature by using the key
“OK”. The main menu is called up at the same time.
Choice of the medium (e.g. ethylene glycol).
---------------------
---------------------
BALANCED PRESSURE
pressure: mbar
flow: l/h
Water
MEASUREMENT-SETUP
---------------------
---------------------
COMPUTER METHOD
pressure: mbar
flow: l/h
Water
MEASUREMENT-SETUP
---------------------
---------------------
KV VALUE METHOD
pressure: mbar
flow: l/h
Water
MEASUREMENT-SETUP
---------------------
---------------------
BALANCED PRESSURE
METHOD
pressure: mbar
flow: l/h
Ethylen glycol 35%
MEASUREMENT-SETUP