background image

 

 

CLEANING 

1.

 

  Turn off and unplug the device before cleaning. 

2.

 

  Remove the accessories per instructions to clean.

 

3.

 

  Do not immerse the motor unit into water or other liquid nor to rinse. Wash the

 

outside wall of the motor unit with a damp cloth.

 

4.

 

  Wash the removable parts except the motor unit in a dishwasher or by hand. 

 

DEVICE MAINTENANCE 

1.

 

  Always unplug the device before cleaning and remove all accessories. 

2.

 

  Clean all the accessories with soapy water. Do not immerse the motor unit in water, 

nor allow water to get in through the motor air vent. 

 

CONNECTION TO POWER 

 

Before connecting, check that the voltage indicated on the appliance(bottom of the 

appliance) corresponds with the main voltage in your home. If this is not the case, 

consult your supplier and do not use. 

 

This appliance may be fitted with a non-rewirable plug. If you need to change the fuse 

in a non-rewirable plug, the fuse cover must be refitted. 

 

This unit must be earthed. It must be disconnected from the main socket when not in 

use. Do not allow this unit to be exposed to rain or moisture. 

 
 
 
 

ovente.com 

Summary of Contents for SM880 Series










Reviews: