INSTALLATION INSTRUCTIONS
1
2
3
BB
AA
STEP B
It is recommended that a small diameter bit be used when first drilling ceramic tiles to avoid breaking them.
Begin with the smaller bit and gradually move to larger drill bits until the proper sized hole is attained.
1. Level the tracks (F) and mark the track holes positions. Temporary removes the frames and ensures that
the distance is correct.
2. Drill pilot holes at the marked place. Ensure that the final hole is large enough to fit snugly the wall anchors.
3. Insert the wall anchors (AA) using a rubber mallet (to avoid breaking the tiles) until the anchors are flush
with the tile surface. Then screw the track on the wall using BB screws.
8
