INSTALLATION INSTRUCTIONS
STEP F
1 & 2. Inset the glass clips (O & Q) and wall brackets (P) on the support bar (N).
3. Place the support bar on the glass panels (C & E), then adjust the glass clips position on the support bar.
4. Mark the wall bracket (P) positions on the wall.
5 & 6. Temporarily remove the support bar from the glass panel.
7. Place the wall bracket (P) on the marked line on the wall, mark the two holes position of the bracket plate.
8. Drill the two holes on the marked place.
9. Insert the wall anchors (AA) then mount the wall bracket plates on the wall using screws (HH).
10. Replace the wall bracket (P) in the support bar,
11. Replace the support bar on the glass panels (C & E) then mount the wall bracket (P) into the bracket plate.
12 - 14. Tighten the screws on the wall bracket (P) and the glass clips (O & Q) with glass brackets (II)
using an Allen key (KK).
1
2
6
7
8
9
10
HH
O
P
Q
O
P
Q
O
P
P
ø 8 mm
O
C
E
3
4
5
11
12
13
14
LL
LL
12
