9
1.
Level the track (B) and mark the track holes’ positions.
2.
Remove the track and drill pilot holes in the marked locations with a ø5/16” (8mm) drill bit.
3.
Insert the wall anchors (HH) using a rubber mallet until the wall anchors are flush with the wall.
4.
Replace and secure the track (B) with screws (BB). Do not overtighten.
WALL TRACK INSTALLATION
ø5/16”
8mm
1”
25mm
Base edge
30 1/8” 765mm
Helpful Hint
Do not overtighten!
This may crack the
acrylic or tile walls.
HH
2
3
Helpful Hint
Make sure there
is a support stud
located behind the
drywall, behind the
tracks!
BB
4
B
1
