CLEANING LINE
FIGURE 10
Care
19
Wipe the exterior of the tube and tip.
Use the cleaning line provided
to clean the tube and tip, by pushing
the cleaning line through the tube.
(FIGURE 10)
(Insert the line at the connector
end where the tube attaches to the
amplifier case and push out through
the tip.)
Re-attach the tube by aligning the tube connector end with the end of the
amplifier case, then
push the connector straight onto the sound post
until it snaps into place
. There is no need to rotate the tube when
re-attaching.
Do not rinse or submerge these parts in water.
There is a risk of
damage if a water drop becomes trapped in the tube. If this should
occur, it will prevent sound from coming through the tube and may be
harmful to your Ovation Shift’s electronics.
