Ovation Pioneer 100 ZOOM WW/CW, User Manual

Page: 9 / 10

9 Version 1.0 www.ovationlight.com
CH5 is used to select the target ID address.
DMX value Function DMX value Function DMX value Function
000-009 ID1-ID66 212 ID23 235 ID46
010-019 ID1 213 ID24 236 ID47
020-029 ID2 214 ID25 237 ID48
030-039 ID3 215 ID26 238 ID49
040-049 ID4 216 ID27 239 ID50
050-059 ID5 217 ID28 240 ID51
060-069 ID6 218 ID29 241 ID52
070-079 ID7 219 ID30 242 ID53
080-089 ID8 220 ID31 243 ID54
090-099 ID9 221 ID32 244 ID55
100-109 ID10 222 ID33 245 ID56
110-119 ID11 223 ID34 246 ID57
120-129 ID12 224 ID35 247 ID58
130-139 ID13 225 ID36 248 ID59
140-149 ID14 226 ID37 249 ID60
150-159 ID15 227 ID38 250 ID61
160-169 ID16 228 ID39 251 ID62
170-179 ID17 229 ID40 252 ID63
180-189 ID18 230 ID41 253 ID64
190-199 ID19 231 ID42 254 ID65
200-209 ID20 232 ID43 255 ID66
210 ID21 233 ID44
211 ID22 234 ID45
Fixture Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses and mirror should
be carried out periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use we recommend clean -
ing on a monthly basis. Periodic cleaning will ensure longevity, and crisp output.
To clean the fixture:
1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2. Vacuum or gently blow away dust and loose particles from the outside of the fixture with low-pressure
compressed air.
3. Clean the surfaces by wiping gently with a soft, clean lint-free cloth moistened with a weak detergent
solution. Do not rub glass surfaces hard: lift particles off with a soft repeated press. Dry with a soft,
clean, lint-free cloth or low-pressure compressed air. Remove stuck particles with an unscented tis
-
sue or cotton swab moistened with glass cleaner or distilled water.
4. Check that the fixture is dry before reapplying power.
Fuse Replacement
This fuse is located in a fuseholder next to the MAINS OUT socket on the connections panel.
To replace a fuse:
1. Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2. Unscrew the cap of the fuseholder and remove the fuse. Replace with a fuse of the same size and
rating only.
3. Reinstall the fuseholder cap before reapplying power.
Troubleshooting
Listed below are a few common problems that you may encounter, with solutions.