6
/
11
2
1
3
For installations where the DMX cable has to run a long distance or is in an electrically noisy environment,
such as in a discotheque, it is recommended to use a DMX terminator. This helps in preventing corruption of
the digital control signal by electrica
l noise. The DMX terminator is simply an XLR plug with a 120 Ω resistor
connected between pins 2 and 3, which is then plugged into the output XLR socket of the last fixture in the
chain. Please see illustrations below.
120
Ω
Display Menu
DMX Address
001 - 512
Fixture
DMX Mode
HSI(11CH)/ STD(17CH)/GUI(18CH)/EXT(58CH)
Run Mode
DMX/Host/Sound
Pan Inv
Close/Open
Tilt Inv
Close/Open
Manual
Pan
0 - 255
Pan Fine
0 - 255
Tilt
0 - 255
Tilt Fine
0 - 255
…
0 - 255
Reset
0 - 255
Information
Time
Current Time
Total Time
Power Count
Sensor
Pan
Tilt
Zoom
Temp
Fan
Temp Info
Head Temp
Fan Speed
Software Version
Panel
Motor
Dimmer
Network
Factory
Password
0 - 255
