10
V1.47
Universal DMX Control
This function allows you to use a universal DMX-512 controller to control the dimmer and strobe. A DMX
controller allows you to create unique programs tailored to your individual needs.
RDM control
The Honor 250T Zoom can communicate using RDM (Remote Device Management) in accordance with
ESTA’s American National Standard E1.20-2006: Entertainment Technology RDM Remote Device Man
-
agement Over DMX512 Networks.
RDM is a bi-directional communications protocol for use in DMX512 control systems, it is the open stan
-
dard for DMX512 device configuration and status monitoring.
The RDM protocol allows data packets to be inserted into a DMX512 data stream without affecting ex
-
isting non-RDM equipment. It allows a console or dedicated RDM controller to send commands to and
receive messages from specific fixtures.
With RDM function, you can set the DMX address of your fixtures remotely. This is especially useful
when the device is installed in a remote area.
Each Honor 250T Zoom has a factory set RDM UID (unique identification number).
Note:
Before operation, enable RDM function in Advanced settings.
Menu
DMX
Mode
Dimmer
Advance
Rotary Knob function
The knob in the rear panel of the Honor 250T Zoom act as multi function. Including rotary control of
dimmer, up/down/enter function function.
Dimmer function:
1. Press the
MENU
button to enter the main menu.
2. Press the
UP
or
DOWN
button to select
Mode
menu and press
ENTER
.
3. Press
DOWN
menu and select
Manual
sub menu.
4. Press
ENTER
and select
Brightness
in third menu.
5.
Rotate the rotary knob to control the dimmer(right stop = maximum output, left stop = zero output), or
strobe(right stop = maximum strobe, left stop = no strobe).
Note:
Rotary dimmer function works in
information Menu
and
Mode-Manual
menu.
Up, Down, Enter function:
The knob can also act as up, down and enter function.
1. Press the
MENU
button to enter the main menu interface.
