13
V1.47
ing on a monthly basis. Periodic cleaning will ensure longevity, and crisp output.
To clean the fixture:
1.
Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2.
Vacuum or gently blow away dust and loose particles from the outside of the fixture with low-pressure
compressed air.
3. Clean the surfaces by wiping gently with a soft, clean lint-free cloth moistened with a weak detergent
solution. Do not rub glass surfaces hard: lift particles off with a soft repeated press. Dry with a soft,
clean, lint-free cloth or low-pressure compressed air. Remove stuck particles with an unscented tis-
sue or cotton swab moistened with glass cleaner or distilled water.
4.
Check that the fixture is dry before reapplying power.
Fuse Replacement
This fuse is located in a fuseholder next to the MAINS OUT socket on the connections panel.
To replace a fuse:
1.
Disconnect the fixture from power and allow it to cool for at least 10 minutes.
2.
Unscrew the cap of the fuseholder and remove the fuse. Replace with a fuse of the same size and
rating only.
3. Reinstall the fuseholder cap before reapplying power.
Troubleshooting
Listed below are a few common problems that you may encounter, with solutions.
The fixture does not work, no light
•
Check the connection of power and main fuse. Be sure the external fuse has not blown.
•
Measure the mains voltage on the main connector.
T
echnical specifications
Model
Honor 250T Zoom
Power supply:
AC100-240V, 50/60Hz
Light source:
500W COB LED (250W warm white + 250W cold white)
Color temperature:
2700K ~ 5600K tunable
Color Rendition:
CRI 97, R9≥90, TLCI 98(2700K)
Zoom scale:
18°-38° manually
Power connection:
PowerCON in&out
Fuse:
F5A, 250V
Maximum power linking:
6 units
Signal connection:
3-pin XLR in & out
DMX channels:
2/3
Control mode:
RDM, DMX, Rotary
Housing:
Colour black, ABS+PC
Size:
745 x 294 x 294mm(29.3 x 11.6 x 11.6in)
Package(carton):
790 x 350 x 360mm(31.1 x 13.8 x 14.2in)
N.W.:
8.7kg(19.2lb)
G.W.:
11.5kg(25.4lb)
Enviroment:
IP20
