COMMAND
HEX
VALUE
FUNCTION
ESC W n XXXX YYYY xxxx yyyy
1B 57 …
PAINT BACKGROUND
ATTRIBUTE
n = 1 .. 9, SPECIFY PATTERN PARAMETER
n = `C` WILL BLANK THE SPECIFIED RECTANGLAR AREA.
XXXX : 4 DIGITS X DIAGONAL STARTING POSITION
YYYY
: 4 DIGITS Y DIAGONAL STARTING POSITION
xxxx : 4 DIGITS x DIAGONAL STARTING POSITION
yyyy : 4 DIGITS y DIAGONAL STARTING POSITION
ESC
X
1B
58
CLEAR
FONT
ENLARGEMENT
RESET VERTICAL, HORIZONTAL FONT SCALE TO 1,
WHICH WAS SET BY COMMAND ESC 6 n1 n2
ESC _ nn
1B 5F nn
SET COPY COUNT
nn : COPY NUMBER (00 TO 99)
nn = 00 NO OTHER COPY BESIDES ORIGINAL
ESC a XXXX YYYY
1B 61 XXXX YYYY
CHANGE
LOGIC
ORIGIN
POINT
POSITION
XXXX : 4 DECIMAL DIGITS,X ABSOLUTE POSITION OF LOGIC OIGIN POINTER
YYYY : 4 DECIMAL DIGITS,Y ABSOLUTE POSITION OF LOGIC OIGIN POINTER
ESC b XXXX YYYY
1B 62
SET CURSOR POSITION
XXXX : 4 DECIMAL DIGITS, X STARTING POSITION
YYYY : 4 DECIMAL DIGITS, Y STARTING POSITION
ESC c X,Y,A,B,L,W,ANGLE1,ANGLE2,FLAG; 1B 63 …
DRAW CIRCLE/ELLIPSE/ARC
DRAW CIRCLE/ELLIPSE/ARC AND FILL PATTERN
(X,Y) : CENTER COORDINATION
A : X RADIUS
B : Y RADIUS
L : LINE TYPE, 0:SOLID LINE, 1:DASH LINE
W : LINE WIDTH 0 .. 7
ANGLE1 : START DEGREE 0 .. 360
ANGLE2 : END DEGREE 0 .. 360
FLAG : 0 : DRAW CIRCLE OR ARC ONLY
1 : DRAW CIRCLE OR ARC AND RADIUS
2 .. 10 : DRAW CIRCLE OR ARC AND RADIUS AND PAINT BACKGROUND
PATTERN
Output
Technology
Printcenter
45
Users
Guide
72