background image

OUTLINE S.R.L.

Via Leonardo da Vinci, 56

25020 Flero (Brescia) Italy

Tel.: +39 030.3581341

Fax +39 030.3580431

[email protected]

www.outline.it

2

SAFETY REGULATIONS

In order to avoid risks for the user’s and other 

people’s safety, as well as annulling the warranty, 

it is advisable to read the suggestions in this section 

for correct use of the product.

•  Do not expose the unit to rain or use it in 

locations with a high humidity level.

•  Ensure that no liquids or solid objects 

accidentally enter the unit; should this occur, 

stop using the unit and contact OUTLINE or 

specialist staff.

•  When connecting the unit, ALWAYS check 

ground connection as required by technical 

and safety norms.

•  If the original connector cable is worn or 

damaged, it must be replaced with another of 

the same type (in perfect condition).

•  Carry out connections in an orderly manner, 

only allowing access to experienced specialist 

staff.

•  The unit must only be opened and/or repaired 

by specialist staff.

•  For any requirements of a technical nature, 

contact OUTLINE or authorized staff.

•  The unit is dedicated to moving heavy or bulk 

objects. For this reason, it must be used under 

the supervision of experienced personnel.

DISPOSAL OF WASTE MATERIALS

Your product is designed and manufactured 

with high quality materials and components, 

which can be recycled and reused. When 

this crossed-out wheeled bin symbol is attached to 

a product, it means the product is covered by the 

European Directive 2012/19/EU  and subsequent 

amendments. This means that the product must 

NOT be disposed of with other household-type 

waste. It is the users’ responsibility to dispose of 

their waste electrical and electronic equipment by 

handing it over to an approved reprocessor. For 

more information about where you can send your 

equipment for recycling, please contact your local 

distributor. The correct disposal of your old product 

will help prevent potential negative consequences 

for the environment and human health.

CONFORMITY AND WARRANTY

All the Outline electro-acoustic and 

electronic devices are in conformity with 

the provisions of EC/EU directives (as 

stated in our CE declaration of conformity).

The CE declaration of conformity is attached to the 

product warranty certificate and is shipped with 

the product.

Summary of Contents for NG01









Reviews: