OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
www.outline.it
5
PAIRING PROCEDURE
The device is supplied with transmitter-receiver
pairing already carried out.
In case of battery replacement, new remote control
or other unintentional loss of pairing it is necessary
to proceed according to the following procedure:
1.
Turn on the generator;
2.
Press and release the ‘PAIR’ button with a small
screwdriver, the LED ‘PAIR’ will blink once;
3.
Press the button 1 on the transmitter (remote
control) near the antenna for a few seconds;
4.
Reboot the device (via USB-C cable);
5.
Press and release the ‘PAIR’ button, wait 3
seconds and press it again, the LED ‘PAIR’ will
blink twice;
6.
Press the button 2 on the transmitter for a few
seconds;
7.
Reboot the device and check for correct
operation.
