Outdooree R8, User Manual

Page: 26 / 50

4.11 Set burst mode/capture
number
a. If you are already in the “ MENU ” skip to
step “d”
b. With batteries and SD card installed and
the camera in the OFF position; slide the
power switch to the “ SETUP ” position.
c. Press the MENU button
d. Press the LEFT arrow button until
“capture number” appears at the top of
the screen.
e. Use the “ UP ” and “ DOWN ” arrows to
choose the number of images
(1, 2, or 3)
you want taken during each activation.
f. Press “ OK ” to save setting.
g. If you need to make additional changes,
proceed to those steps now. If you are
done making the changes you want,
press “
MENU ” and turn the camera off
until you are ready to put the camera into
action.
25