Outdooree R8, User Manual

Page: 41 / 50

Camera won’t power up
1. Make sure that you have installed at least 4
batteries
(the required minimum #)
in the
battery compartment, starting at the top, filling
battery spaces 1-4 with no “gaps”.
We recommend using 8 new alkaline or lithium
AA batteries in all
Outdooree R8 cameras.
2. Make sure that the batteries are installed
correctly, observing proper polarity. Always
place the negative
(flat)
end of each battery in
contact with the long spring side of its slot
inside the camera.
3. After moving the switch from “ OFF ” to
“ SETUP ” or “ ON ”, make sure that the switch is
correctly in position to ensure the proper mode
(avoid positions “between” two modes).
4. Do not move the switch directly from “ ON ”
to “ SETUP ”-always move the switch all the way
down to “ OFF ” first, then back up to “ SETUP ”.
40