10
Operating Instructions
Before operating your fire pit, ensure all gas connections are
properly tightened and thoroughly leak checked. Refer to the
Crystal Fire Manual for information on proper leak checking and
other critical safety information.
With the control valve on the fire pit in the OFF position,
open the valve on the propane tank or natural gas
supply.
Make sure there are no gas leaks at the regulator or
inlet side of the key valve. If leak is detected,
immediately shut off the propane tank and wait 5
minutes to allow gas to dissipate. Fix any leaks before
proceeding.
Press the sparker button and hold, look and listen for
spark between electrode and grounding rod.
While depressing the sparker, press in and turn counter-
clockwise to open the valve.
If burner does not light after 10 seconds, close the valve
and wait 5 minutes to allow gas to dissipate before
attempting ignition again.
Refer to the Crystal Fire Manual included with your burner for
more detailed information on operation, maintenance, and safety
of your burner.
Always make sure all gas connections are properly
tightened and checked for leaks before operation.
3. Turn Valve to ON
2. Look/listen for spark
1. Depress sparker
