15
HGI-31 : 1-23-2018
www.outdoorrooms.com
1. Position the back log (A) as seen in Img. 10.
Press it in place such that the tabs secure it on
both ends. The log should be flat against the
back of the firebox.
2. Position the two (2) larger side logs (B) and
(C) as shown in Img. 11.
3. Position the center log (D) over tube as seen in
Img. 11.
4.
Position the fiber embers over the porting - be
sure not to interfere with the pilot assembly.
Pull the material apart so it is light and thin
over the ports, it is not necessary to use all of
the material.
5. Position the glass embers over the LED tray.
Use all the glass embers, place them randomly
ensuring the darker side of the material is not
uniformly installed.
6. Position the last two (2) smaller logs (E) and
(F) to line up with the indentations for the
grate bar as shown in Img. 12.
STEP FIVE: LOGS AND EMBERS
A
B
D
C
E
F
(Img. 10)
(Img. 11)
(Img. 12)
