10 |
P a g e
Dining and Pub-height Colonial Table Setup
1.
Remove all components from packaging and
inspect for damage or missing parts.
2.
Place the fiberglass table base in your desired
location on flat, level ground.
3.
Line up top as shown to ensure foam pads
contact the underside of the top.
4. With help from another person, gently set concrete
top onto the base and center it. If the top doesn’t sit flat,
ensure that it is lined up correctly. For a more permanent
installation, an outdoor-rated construction adhesive or
silicone can be used to attach the top to the base.
5. Gently lower your crystal fire burner into the burner
cutout and continue to the page 14 for gas hookup and
igniter hookup instructions.
6. Refer to page 13 for anchoring instructions.
*Dining-height base shown.
Installation is the same for
dining and pub-height models
Instructions For Models CM-48-DIN-K, MNB-48-DIN-K, CM-48-PUB-K,
MNB-48-PUB-K ONLY
Summary of Contents for CM-48-DIN-K
Page 19: ...19 P a g e ...
Page 20: ...20 P a g e 2014 The Outdoor GreatRoom Company ...
